• LR, ABS, NK, GL, DNV, BV, KR, RINA, CCS EH36 Shipbuilding steel plate
  • Capable Classification Society Quality Authentication from LR, ABS, NK, GL, DNV, BV, KR, RINA, CCS,EH36 shipbuilding steel plateThe EH36 shipbuilding steel plate is the mainly kinds of steel for shipbuilding and oil platform, the shipbuilding grade EH36 can be used in the manufacture of the ship s hull structure, whose weight is more then 10000 tons.  Shipbuilding grade EH36  is the high tensile strength steel,  EH36 steel for shipbuilding and oil platform must be good toughness properties, higher strength, strong corrosion-resistance, the processing properties, and welding properties.

    EH36 shipbuilding steel plate specification:
    Thickness: 6mm to 240mm, Width: 1500mm to 4020mm, Length: 3000mm to 27000mm.

    EH36 shipbuilding steel plate Chemical Composition %


    Grade

    C max

    Si max

    Mn

    P max

    S max

    Als min

    Ti max

    Cu max

    Cr
    max

    Ni
    max

    Mo
    max

    Nb

    V

    EH36

    0.18

    0.50

    0.90-1.60

    0.035

    0.035

    0.015

    0.02

    0.35

    0.20

    0.40

    0.08

    0.02-0.05

    0.05-0.10

    Note: Generally speaking CE will be 0.40%. If the delivery condition is TMPC, the CE will be : ≤ 0.38% (thickness ≤ 50mm),≤0.40%( when the thickness >50-100).
    Ceq% =(C+Mn)/6+(Cr+Mo+V)/5+(Ni+Cu)/15.

    EH36 shipbuilding steel plate Mechanical Property


    Grade

    Rm
    (MPa)

    Re(MPa) min

    A% min

    Akv/J min

    EH36

    490-630

    355

    21

    E.T °C

    Thickness (mm)

    -40

    50

    >50-70

    >70-100

    L

    C

    L

    C

    L

    C

    34

    24

    41

    27

    50

    34

    Note: In the list , Rm: .tensile strength,Re: Yield strength,A%: elongation, E.T: experimental temperature,L: lengthways, C: crosswise.

    EH36 shipbuilding steel plate Condition Of Delivery


    Grade

    Fine grains elements

    category

    The thickness of steel

    ≤ 12

    >12.5-20

    >20-25

    >25-35

    >35-50

    >50-100

    EH36

    Any

    Plate/sheet

    N,TM

    Profile steel

    N(25),TM(25),AR*(15),CR*(15)

    -

    Note: 1. delivery condition: A =Any ; N=Normalized ; CR=Control Rolled ; TM=TMPC, Temperature - deformation control rolling; AR*= Can be hot rolled with the agreement of Classification Society ; CR*=Can be control rolled with the agreement of Classification Society .
    2.  The Figure in the ( ) means the sampling volume to do the impact test, the unit is Ton.(-) means without impact test.

    Contrast in the different standard


    ASTM A131M

    TOCT 5521

    BS LR

    GB712

    EH36

    E36

    EH36

    E36

    EH36 shipbuilding steel plate Available Specification


    variety
    Thickness (mm) Width (mm) Longth/ inner diameter (mm)
    Shipbuilidng plate cutting edges 6~200 1500~3000 3000~15000
    non- cutting edges 1300~3000
    Shipbuilidng coil cutting edges 1.2~19 1500~2000 760+20~760-70
    non-cutting edges 1510~2010

    EH36 shipbuilding steel plate theoretical weight


    Thickness (mm)
    theoretical weight Thickness (mm) theoretical weight
    Kg/ft2 Kg/m2 Kg/ ft2 Kg/m2
    6 4.376 47.10 25 18.962 196.25
    7 5.105 54.95 26 20.420 204.10
    8 5.834 62.80 28 21.879 219.80
    10 7.293 78.50 30 23.337 235.50
    11 8.751 86.35 32 25.525 251.20
    12 10.21 94.20 34 26.254 266.90
    14 10.939 109.90 35 27.713 274.75
    16 11.669 125.60 40 29.172 314.00
    18 13.127 141.30 45 32.818 353.25
    20 14.586 157.00 48 35.006 376.80
    22 16.044 172.70 50 36.464 392.50
    24 18.232 188.40

    EH36 shipbuilding steel plate dimensional deviation


    nominal thickness(mm)
    The thickness deviation with following width (mm)
    ≤1200 >1200~1500 >1500~1800 >1800
    >6.0~8.0 ±0.29 ±0.30 ±0.31 ±0.35
    >8.0~10.0 ±0.32 ±0.33 ±0.34 ±0.35
    >10.0~12.0 ±0.35 ±0.36 ±0.37 ±0.43

    nominal thickness(mm)


    minus deviation (mm) The thickness deviation with following width (mm)
    > 1000 ~1200 > 1200 ~1500 > 1500 ~1700 > 1700 ~1800 > 1800 ~2000 > 2000 ~2300 > 2300 ~2500 > 2500 ~2600 2600 ~2800 > 2800 ~3000
    >12~25 -0.8 +0.2 +0.2 +0.3 +0.4 +0.6 +0.8 +0.8 +1.0 +1.1 +1.2
    >25~30 -0.9 +0.2 +0.2 +0.3 +0.4 +0.6 +0.8 +0.9 +1.0 +1.1 +1.2
    >30~34 -1.0 +0.2 +0.3 +0.3 +0.4 +0.6 +0.8 +0.9 +1.0 +1.2 +1.3
    >34~40 -1.1 +0.3 +0.4 +0.5 +0.6 +0.7 +0.9 +1.0 +1.1 +1.3 +1.4
    >40~45 -1.2 +0.4 +0.5 +0.6 +0.7 +0.8 +1.0 +1.1 +1.2 +1.4 +1.5

    EH36 shipbuilding steel plate application:
    EH36 shipbuilding steel plate is widely used in the shipbuilding industry both in hull construction and in the superstructure itself. This shipbuilding grade is used in the cabin structures of cruisers and ships, construction structural parts of the ships, Barges, Marine Equipment, Ice-Breakers, Ice-Going Vessels, Container Vessels, Bulk Cargo Vessels, Ferries and Yachts in addition to Offshore Structures and Pressure Equipments.

    If you want to know more information about EH36 shipbuilding steel plate , please contact us and let us know your specification, the best price will be quoted in shortest time.

    • Email:sales1service@163.com
    • Skype ID:Taya bebon